(as of [price_update_date] – Details)
Cel-Fi GO X Installation
1. Install Outdoor Antenna
The most important part of installing your GO X is finding the outdoor location with the best outdoor signal. The Cel-Fi Wave app allows you to test and find the perfect location.
2. Mount & Install Cel-Fi GO X
After the Outdoor Antenna is installed, mount and connect the Cel-Fi GO X indoors, either in an attic, a closet, or somewhere out of the way.
3. Install Dome or Panel Antenna
Mount either the included dome or panel antenna inside the building. Dome antennas are installed in a ceiling, while panel antennas are wall-mounted. We include both, just choose which you want to use.
Cel-Fi WAVE App for iOS and Android
This kit is assembled by the team at Waveform.
Our team of Signal Specialists know the Cel-Fi GO X inside and out. If you have any issues during setup, we’ll go above and beyond to help you resolve your problems.
Cel-Fi WAVE App
Control and Monitor the GO X With Your iOS or Android Device
The innovative Cel-Fi WAVE app gives you complete control over your Cel-Fi GO X. You can select which carrier to boost, which bands the device amplifies, and view detailed diagnostic information.
Please note: You will need internet access to download the Wave app.
WAVE app features include:
Switch between amplifying AT&T, Verizon, T-Mobile and US Cellular. Run an “Antenna Position Test” to help determine the best outdoor antenna location. See which frequency bands the GO X is amplifying. View diagnostic information about the GO X’s performance. Send a log of your GO X’s performance for troubleshooting help.
The GO X requires 1 to 2 bars of reliable, usable signal outdoors
The Cel-Fi GO X will amplify and bring in whatever signal you have outdoors. It’s critical that you have at least 1-2 bars of reliable, usable signal outdoors in order to get reliable signal indoors.
We recommend testing your signal outdoors before purchasing.
The GO X does not support Sprint or Verizon 2G/3G Service
Sprint users: The GO X does not support Sprint at this time.
Verizon users: The Cel-Fi GO X only amplifies Verizon LTE voice and data signal, not older 2G or 3G service. You must have 1-2 bars of reliable, usable 4G LTE signal outdoors for the GO X to work.
Kits include both Panel and Dome Antennas
Dome Antennas spread signal in all directions. To install a dome antenna, you need access to the back side of the ceiling (e.g. a loft or crawl space) to run cable.
Panel Antennas direct signal in the direction they are pointing. They can be installed on a wall.
We include both antennas in our kits – pick which one you want to use and discard the other.
1 Dome or Panel Antenna (both included) 2 Dome or Panel Antennas (both included)
Kit Includes Signal Splitter
Coverage Area in Open Space
1 floor – Up to 1,500 sq ft 2 floors – Up to 3,000 sq ft
3G, 4G LTE 3G, 4G LTE
LTE Only LTE Only
3G, 4G LTE 3G, 4G LTE
Wave App for iOS/Android
100 dB 100 dB
Max Downlink Power
16 dB (10 dBm per 5 MHz) 16 dB (10 dBm per 5 MHz)
100dB SINGLE-CARRIER BOOSTER ADVANTAGE: The GO X is the only 100dB cellular signal booster. The GO X only amplifies one cell carrier at a time, but boosts signal by 40 dB more than other boosters. Gain is a measure of amplification – more gain means faster data rates, a larger coverage area, and better cell signal.
FASTEST DATA RATES: Slow data rates are the excruciating symptom of weak signal. The Cel-Fi GO X AT&T, T-Mobile, and Verizon signal booster amplifies cell signal to bring you perfect coverage.
NO MORE DROPPED CALLS: With the Cel-Fi GO X boosting your cell signal, dropped calls and poor audio quality are eliminated.
FULLY FCC CERTIFIED: Designed in California and certified as a consumer cell phone signal booster with FCC ID YETG32-2451213